Dragonflyを用いたCTによる、気孔を評価するための3つのシンプルな（そして高速な！）方法をご覧ください。各方法はマクロを使用して自動化でき、その方法と必要な分析時間の詳細を記載したアプリケーションノートをダウンロードできます。

あるホルシュタイン岩の堆積スラブについて、コンピュータ断層撮影を用いて化石の含有量を調査することになりました。最新のCT技術は、誰も予想していなかった結果をもたらしました。

Have you ever pondered the wondrous journey of life, from conception to birth? At Comet Yxlon, we are proud to support the Museum für Naturkunde Berlin in their quest to answer this profound question through the innovative application of CT technology.

By chance, we recently encountered a phenomenon together with a customer that we had not paid attention to before. An apparently resolved X-ray image turned out to be a fake. A simulation model proved the mystery.

自然科学に向けたトラの頭蓋骨のCTスキャンが、当社のデュアルヘリカルスキャン軌道の威力を明らかにしました。ストーリーを読んで、その違いを見つけてください。

The Dragonfly Deep-Learning, super-resolution model takes the input of poor resolution scans to create superior image quality results – almost like the high-resolution images but without the need to scan at high resolution! Learn about this significant advantage!

ChatGPTやOpenAI、そして現在市場に出回っている素晴らしいAIツールの数々は、誰もが耳にしたことがあるはずです。しかし、CTデータの評価に人工知能を試したことがありますか？ 画像解析にAIを使えることをご存じでしょうか？ぜひ、読んでみてください。

リチウムイオン電池（LIB）は、現代の生活に欠かせないものとなっています。電池の集中的な検査は、その品質と機能を確保するためだけでなく、安全面でも重要です。CTは、その詳細をご紹介します。

エレクトロニクス製造企業は、製品内部の気孔を正確に評価するという課題に直面しています。Peter KochとJeff Urbanskiが、重要な境界面でのより正確な空隙測定のために連携する新しい分析方法を紹介します。

High-resolution CT of a 3D-printed plastic impeller by the YXLON FF35 CT Metrology system provides clear insights into the inner structures and accurate results. What about the capabilities of YXLON UX20 with the new MesoFocus tube?

今回のブログでは、銅製の3Dプリント部品の結果を紹介したいと思います。このような製造やテストアプリケーションの専門家でなくても、品質チェックが、より高い解像度によって、より適切な情報を明らかにすることがわかります。

このブログでは、焦点位置に着目し細部まで高解像度を実現するための方法を紹介します。CTの高解像度は、非常に小さな焦点位置、高倍率、そして非常に正確な回転軸を持つよく調整されたシステムによって達成されます。ここで、正しいKVクラスの問題に戻ります。

2021年春、待望の450kV メゾフォーカス管がコメット・エクスロンに誕生しました。このブログでは非常に確信を持てる実験結果を冒頭にお伝えし、450kVのクローズド光源による将来の可能性とアイデアをお見せしたいと思います。

The early determination of the quality of a motor using CT before further processing would save time, resources, material, and costs, an economic factor that should not be underestimated within the steadily increasing demand for electromobility.

アディティブ・マニュファクチャリングは、3Dプリントとも呼ばれ、CADモデルやデジタル3Dモデルから3次元の物体を構築することです。セラミックスのアディティブ・マニュファクチャリングの手法として最も利用されているのが、直接インク書込み（DIW=Direct Ink Writing）です。その挑戦についてご紹介します。

When we look for the optimal flat-panel detector, it’s not all about the highest possible resolution. Christian Jeuschede explains why we still stick to 139 µm respectively 150 µm pixel pitch instead of 100 µm and what to have in mind when chosing the best fit.

Kathy Scott, Service Sales Director at Yxlon/Comet Technologies USA knows that service matters. With her long experience, she knows service should rate nearly as high in the decision to purchase an inspection system as the system itself.

One might think a measurement using the same calibrated tool would have the same accuracy regardless of the object being measured. But metrology is more than that, as the whitepaper “Uncertainty of measurement” will show.

Microlaunchers are an alternative to conventional launch vehicles. They are designed to launch small satellites into space. Fraunhofer IWS and the TU in Dresden developed an additively manufactured rocket engine.

The gold standard for 3D measurement equipment is the DIN EN ISO 10360 Geometrical Product Specification (GPS). It is designed to help compare different equipment and create a clear understanding of when a system is within the specification and when

リチウムイオン電池（LIB）は、現代生活に欠かせないものとなっています。二次電池の徹底的な検査は、その品質や機能を確保するためだけでなく、安全面でも非常に重要です。

One might think a measurement using the same calibrated tool would have the same accuracy regardless of the object being measured. But metrology is more than that, as the whitepaper “Uncertainty of measurement” will show.

The Institute for Plastics Technology in Stuttgart (IKT) shows several examples to demonstrate how computed tomography supports the development of new materials and additive manufacturing processes.

There is a range of terminology for CT system accuracy and uncertainty that should be understood when evaluating 3D scanning systems, this blog post illustrates terms, such as Precision and Accuracy, Tolerance, Uncertainty of Measurement.

Evolution still raises many questions for science. Prof. Dr. John Nyakatura and his young team of junior scientists are focusing on the functional morphology of vertebrates and trying to track down the evolution of early primates.

Electromobility brings with it new challenges. New components require new test methods to ensure functionality and safety. In a joint project, the Fraunhofer IFAM and Yxlon have succeeded for the first time looking into the inside of cast rotors.

TEI is a global leader in design, engineering and manufacturing for prototype, pre-production and mass production equipment for the casting industry. They invested in new, advanced technologies including 3D printing, CT and X-ray inspection.

In an extensive development project from the automotive industry, it once again became clear that x-ray computed tomography supports in research & development as well as in the elaboration of production processes and helps to save time and money.

X-ray inspection for electronics has been around for decades, but that does not mean it has stayed the same. As the design and manufacturing for electronics shifts to smaller and more compact and dense products, X-ray technology has shifted as well.

The Impact of Industrial Computerized Tomography on the Castings Industry

The growth of the orthopedics market poses a huge opportunity for Industrial Computed Tomography (CT) as a quality inspection tool for this highly regulated industry, where quality ...

Additive manufacturing (AM) is one of the most revolutionary processes to come along in many years, making a dramatic impact on the industrial market.

近年、積層造形技術は多くの産業で取り入れられ、特に航空・自動車産業で大きな役割を担っています。

Starting out mainly as a prototyping technology Additive Manufacturing (AM) gained tremendous momentum for use in industrial applications over the last 5 years. For highly demanding functional parts, laser beam powder bed fusion (LB-PBF) became ...

The Zoological Museum in the Center for Natural History at the University of Hamburg is currently running a special exhibition about the tragic phenomenon of disappearing species in the animal kingdom.

At the end of July, YXLON International, a company of the Swiss tech holding COMET Group, lent one of their state-of-the-art computed tomography systems to the California Academy of Sciences to experience the benefits of CT in biological research.

An insulated-gate bipolar transistor (IGBT) is a three-terminal power semiconductor device primarily used as an electronic switch developed to combine high efficiency and fast switching.

Abigail Curtis, a postdoctoral fellow at the American Museum of Natural History in New York, demonstrates how computed tomography reveals unexpected scientific insights into bat physiology.

In a recent CT Science Days event, Dr. Edward Stanley, PhD of herpetology, of the California Academy of Sciences, discussed how researchers are using computed tomography to study reptiles and amphibians and strengthen their collaboration.